Search
DIN741 wire rope clip
parameters1:DIN 741 ZP
parameters2:wire rope clip
parameters3:wire rope clamp
Item: Wire Rope Clip
Size: 10mm
Weight: 60g
Surface: Zinc Plated
Material: Q235 carbon steel or stainless steel

Item: Wire Rope Clip
Size: 10mm
Weight: 60g
Surface: Zinc Plated
Material: Q235 carbon steel or stainless steel

How to apply clips:
The correct way to attach U-bolts is shown at the right, the U-section is in contact with the rope's dead end.

Apply the first clip one base width from dead end of wire rope, the next clip as near the loop as possible. Space additional clips if required equally between the first two.

Apply the initial load and retighten nuts. Rope will stretch and shrink in diameter when loads are applied. Inspect periodically and retighten.

IMPORTANT: Failure to make a termination in accordance with the instructions, or failure to periodically check and retighten to the recommended torque, will cause a reduction in efficiency rating. Never use any wire rope clips to directly connect two straight lengths of wire rope.)

M3 9 10 12 4 10 21 16
M5 11 11 13 5 10 23 19
M6 13 12 15 5 11 26 23
M8 16 14 19 6 15 30 28
M10 19 18 22 8 17 34 34
M11 20 19 22 8 18 36 36
M13 24 23 30 10 21 40 45
M14 25 23 30 10 22 44 47
M16 29 26 33 12 26 50 51
M19 32 29 38 12 30 54 63
M22 37 33 44 14 34 61 71
M26 41 35 45 14 37 65 81
M30 46 37 50 16 43 74 94
M34 52 42 55 16 50 80 104
M40 58 45 60 16 55 88 124
Products Search
脚注信息
Copyright(C)2014  Qingdao Sincere Trading Company Limited
访问统计
SKYPE US